
  ----------------------------------------------------------------------------------------------------
 01)	( 3, 2)   0.273409138442041 +  0.563821092829119 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 01)	( 3, 2)   0.273409138442041 + -0.563821092829119 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 01)	( 3, 2)  -3.273409138442041 +  0.563821092829119 i 1e-07
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 01)	( 3, 2)  -3.273409138442041 + -0.563821092829119 i 1e-07
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 01)	( 2, 3)   0.273409138442041 +  0.563821092829119 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 01)	( 2, 3)   0.273409138442041 + -0.563821092829119 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 01)	( 2, 3)  -3.273409138442041 +  0.563821092829119 i 1e-07
^^>>ERROR: corruption by round off errors in pare_mateless_face.
^^>>ERROR: face wasn't pared, when it should have been
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 01)	( 2, 3)  -3.273409138442041 + -0.563821092829119 i 1e-07
^^>>ERROR: corruption by round off errors in pare_mateless_face.
^^>>ERROR: face wasn't pared, when it should have been
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
  ----------------------------------------------------------------------------------------------------
 02)	( 3, 2)  -1.063559204522075 +  1.164380499099818 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 02)	( 3, 2)  -1.063559204522075 + -1.164380499099818 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 02)	( 3, 2)  -1.936440795477924 +  1.164380499099818 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 02)	( 3, 2)  -1.936440795477924 + -1.164380499099818 i 1e-07
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 02)	( 2, 3)  -1.063559204522075 +  1.164380499099818 i 1e-07
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 02)	( 2, 3)  -1.063559204522075 + -1.164380499099818 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 02)	( 2, 3)  -1.936440795477924 +  1.164380499099818 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 02)	( 2, 3)  -1.936440795477924 + -1.164380499099818 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
  ----------------------------------------------------------------------------------------------------
 03)	( 3, 2)  -0.822388727866991 +  1.112527792130389 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 03)	( 3, 2)  -0.822388727866991 + -1.112527792130389 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 03)	( 3, 2)  -2.177611272133008 +  1.112527792130389 i 1e-07
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 03)	( 3, 2)  -2.177611272133008 + -1.112527792130389 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 03)	( 2, 3)  -0.822388727866991 +  1.112527792130389 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mateless_face.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 03)	( 2, 3)  -0.822388727866991 + -1.112527792130389 i 1e-07
^^>>ERROR: corruption by round off errors in pare_mateless_face.
^^>>ERROR: face wasn't pared, when it should have been
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 03)	( 2, 3)  -2.177611272133008 +  1.112527792130389 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 03)	( 2, 3)  -2.177611272133008 + -1.112527792130389 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
  ----------------------------------------------------------------------------------------------------
 04)	( 3, 2)   0.681519354760437 +  0.147287943028609 i 1e-07
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 04)	( 3, 2)   0.681519354760437 + -0.147287943028609 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 04)	( 3, 2)  -3.681519354760436 +  0.147287943028609 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 04)	( 3, 2)  -3.681519354760436 + -0.147287943028609 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 04)	( 2, 3)   0.681519354760437 +  0.147287943028609 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 04)	( 2, 3)   0.681519354760437 + -0.147287943028609 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 04)	( 2, 3)  -3.681519354760436 +  0.147287943028609 i 1e-07
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mateless_face.
^^>>ERROR: pare_face failed.
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 04)	( 2, 3)  -3.681519354760436 + -0.147287943028609 i 1e-07
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
  ----------------------------------------------------------------------------------------------------
 05)	( 3, 2)   0.571863231390706 +  0.252351616795528 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 05)	( 3, 2)   0.571863231390706 + -0.252351616795528 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 05)	( 3, 2)  -3.571863231390706 +  0.252351616795528 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 05)	( 3, 2)  -3.571863231390706 + -0.252351616795528 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 05)	( 2, 3)   0.571863231390706 +  0.252351616795528 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 05)	( 2, 3)   0.571863231390706 + -0.252351616795528 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 05)	( 2, 3)  -3.571863231390706 +  0.252351616795528 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 05)	( 2, 3)  -3.571863231390706 + -0.252351616795528 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
  ----------------------------------------------------------------------------------------------------
 07)	( 3, 2)   0.531012602661534 +  0.273494396101797 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 07)	( 3, 2)   0.531012602661534 + -0.273494396101797 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 07)	( 3, 2)  -3.531012602661534 +  0.273494396101797 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 07)	( 3, 2)  -3.531012602661534 + -0.273494396101797 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 07)	( 2, 3)   0.531012602661534 +  0.273494396101797 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 07)	( 2, 3)   0.531012602661534 + -0.273494396101797 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 07)	( 2, 3)  -3.531012602661534 +  0.273494396101797 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 07)	( 2, 3)  -3.531012602661534 + -0.273494396101797 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
  ----------------------------------------------------------------------------------------------------
 08)	( 3, 2)  -0.176111557895748 +  0.891627543858532 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 08)	( 3, 2)  -0.176111557895748 + -0.891627543858532 i 1e-07
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 08)	( 3, 2)  -2.823888442104252 +  0.891627543858532 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 08)	( 3, 2)  -2.823888442104252 + -0.891627543858532 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 08)	( 2, 3)  -0.176111557895748 +  0.891627543858532 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 08)	( 2, 3)  -0.176111557895748 + -0.891627543858532 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 08)	( 2, 3)  -2.823888442104252 +  0.891627543858532 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 08)	( 2, 3)  -2.823888442104252 + -0.891627543858532 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
  ----------------------------------------------------------------------------------------------------
 09)	( 3, 2)  -1.231365882100651 +  1.181179136574646 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 09)	( 3, 2)  -1.231365882100651 + -1.181179136574646 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 09)	( 3, 2)  -1.768634117899349 +  1.181179136574646 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 09)	( 3, 2)  -1.768634117899349 + -1.181179136574646 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 09)	( 2, 3)  -1.231365882100651 +  1.181179136574646 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 09)	( 2, 3)  -1.231365882100651 + -1.181179136574646 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 09)	( 2, 3)  -1.768634117899349 +  1.181179136574646 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 09)	( 2, 3)  -1.768634117899349 + -1.181179136574646 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
  ----------------------------------------------------------------------------------------------------
 10)	( 3, 2)  -0.943438327815293 +  1.141151187720406 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 10)	( 3, 2)  -0.943438327815293 + -1.141151187720406 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 10)	( 3, 2)  -2.056561672184706 +  1.141151187720406 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 10)	( 3, 2)  -2.056561672184706 + -1.141151187720406 i 1e-07
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 10)	( 2, 3)  -0.943438327815293 +  1.141151187720406 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen:(T) pared:(T) faces:(T) cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /   |Free?
 10)	( 2, 3)  -0.943438327815293 + -1.141151187720406 i 1e-07
^^>>ERROR: corruption by round off errors in pare_mateless_face.
^^>>ERROR: face wasn't pared, when it should have been
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 10)	( 2, 3)  -2.056561672184706 +  1.141151187720406 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 10)	( 2, 3)  -2.056561672184706 + -1.141151187720406 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
  ----------------------------------------------------------------------------------------------------
 11)	( 3, 2)   0.597265244764000 +  0.223225966457038 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 11)	( 3, 2)   0.597265244764000 + -0.223225966457038 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 11)	( 3, 2)  -3.597265244763999 +  0.223225966457038 i 1e-07
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 11)	( 3, 2)  -3.597265244763999 + -0.223225966457038 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 11)	( 2, 3)   0.597265244764000 +  0.223225966457038 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 11)	( 2, 3)   0.597265244764000 + -0.223225966457038 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 11)	( 2, 3)  -3.597265244763999 +  0.223225966457038 i 1e-07
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 11)	( 2, 3)  -3.597265244763999 + -0.223225966457038 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
  ----------------------------------------------------------------------------------------------------
 12)	( 3, 2)   0.476225374351834 +  0.335893920570061 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 12)	( 3, 2)   0.476225374351834 + -0.335893920570061 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 12)	( 3, 2)  -3.476225374351834 +  0.335893920570061 i 1e-07
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 12)	( 3, 2)  -3.476225374351834 + -0.335893920570061 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 12)	( 2, 3)   0.476225374351834 +  0.335893920570061 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 12)	( 2, 3)   0.476225374351834 + -0.335893920570061 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 12)	( 2, 3)  -3.476225374351834 +  0.335893920570061 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 12)	( 2, 3)  -3.476225374351834 + -0.335893920570061 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
  ----------------------------------------------------------------------------------------------------
 13)	( 3, 2)   0.295161963992842 +  0.539127458455876 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 13)	( 3, 2)   0.295161963992842 + -0.539127458455876 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 13)	( 3, 2)  -3.295161963992841 +  0.539127458455876 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 13)	( 3, 2)  -3.295161963992841 + -0.539127458455876 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 13)	( 2, 3)   0.295161963992842 +  0.539127458455876 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 13)	( 2, 3)   0.295161963992842 + -0.539127458455876 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 13)	( 2, 3)  -3.295161963992841 +  0.539127458455876 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 13)	( 2, 3)  -3.295161963992841 + -0.539127458455876 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
  ----------------------------------------------------------------------------------------------------
 14)	( 3, 2)   0.325799049368975 +  0.511380200203660 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>> ERROR: within compute_normal_to_Dirichlet_plane, max_abs < epsilon, which should never happen.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 14)	( 3, 2)   0.325799049368975 + -0.511380200203660 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 14)	( 3, 2)  -3.325799049368975 +  0.511380200203660 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 14)	( 3, 2)  -3.325799049368975 + -0.511380200203660 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 14)	( 2, 3)   0.325799049368975 +  0.511380200203660 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 14)	( 2, 3)   0.325799049368975 + -0.511380200203660 i 1e-07
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Roundoff errors in cut_face_if_necessary.
^^>> slice_with_hyperplane fails.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 14)	( 2, 3)  -3.325799049368975 +  0.511380200203660 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
 14)	( 2, 3)  -3.325799049368975 + -0.511380200203660 i 1e-07
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>>ERROR: intersect_with_halfspaces fails in try_this_alpha.
^^>>ERROR: topological round off errors in pare_mated_face and try_this_alpha.
^^>>ERROR: pare_face failed.
^^>>ERROR: Polyhedron construction fails in intersect_with_halfspaces.
^^>> o31_deviation was too great.
^^>> failure cutting.
^^>>ERROR: slicing polyhedron fails.
^^>>ERROR: initial_polyhedron() returns NULL.
>>ERROR: compute_Dirichlet_domain returned NULL.
SUCCESS!!
Past Cycle!!  |gen: F  pared: F  faces: F  cycle: F  finite: F  |dev:  -         base:[ 0.02, 0.02, 0.01]>>0.00  #fve:  /  /         
  ------------------------------------------------

 and we're done